Hi,
Are there documents about performance specification of FMC30RF ?
I am testing my FMC30RF recently using FMC30RFAPP.exe. I choose to load my own txt file to send according to API Software. When I sent a sine wave file or OFDM file or AWGN file, I found there was a big dc component in spectrum. Also, When I sent all 0 data, I found the noise of receiving was a little big. All the setting of API Software was default settings, that means 2nd LNA was excluded from the RX path and the Programmable Attenuator had maximum attenuation and so on.
Below attachments are the analysis result of the matlab when send 1.awgn signal 2.ofdm bandwidth signal of 30MHz bandwidth 3.sine wave signal of 960kHz 4. send all 0, that is to say send nothing.
If there is a performance specification document, I can compare it with my result.
Thanks.
Marchzh