These forums will be taken offline, effective March 13, 2015.
Ongoing support will be available at support.4dsp.com
Open support tickets on this forum will remain open with full support until May 31, 2015.
All topics will be archived and available until March 31, 2016

« previous next »
Pages: [1]   Go Down

Topic: Generating various sampling frequencies from 4DSP FMC150 High Speed ADC/DAC card  (Read 4434 times)

sunil kumar September 16, 2013, 08:17 AM

  • Member
  • *
  • Posts: 3
Hello,
We are working on the Xilinx FPGA Virtex 6 ML605 Board.
We have connected high speed ADC/DAC FMC150  card of 4dsp to the LPC (Low Pin Count) connector of ML605 Board and trying to generate 10MHz, 20MHz and 40MHz frequencies from CDCE72010 of 4DSP high speed ADC/DAC card. We are using reference design of Avnet for that.
We have following queries:

We understand few parameters needs to be modified.
Could you tell me which parameters exactly need modification & how to change them?
Could you send the modified parameters for the frequency 10MHz, 20MHz & 40MHz?
  • Logged
Pages: [1]   Go Up
« previous next »

These forums will be taken offline, effective March 13, 2015.
Ongoing support will be available at support.4dsp.com
Open support tickets on this forum will remain open with full support until May 31, 2015.
All topics will be archived and available until March 31, 2016