Hello,
I want to use " FMC204 Cards " (Digital to Analog Converters) in my design based Xilinx's "KC705 kintex-7 kit" board.
I have seen the reference design provided by the 4 DSP for evaluating the card and I want to use my own inputs to the DAC instead of those provided by the design and want to merge my own design in that.
My problem is that I don’t want to use the Ethernet interface provided in the reference design to configure the DAC using commands and I don’t want to use the steller IP tool for my development. So please tell me that among the reference design components
· Sip_router,
·[/size] sip_cid,
·[/size] sip_i2c_master,
·[/size] sip_cmd_mux
·[/size] sip_mac_engine
·[/size] sip_fmc_ct_gen
·[/size] sip_fmc_204
which component is of my use(I think it should be sip_fmc_ct_gen and sip_fmc_204 only) and how can I utilize them in my own design without having dependency on other components?
Initially I want to use an DDS output Sine and Cosine waves to feed as input to the FMC204 DAC card instead of the reference wave provided in reference design.Is there any document(other than pdfs provided with the design) which provides the complete design detail of the reference design provided so that after understanding that , I can change that according to my requirements?
----
Thanks
Sugandh Mishra