Topic: FMC125 heatsink/fan  (Read 3893 times)

jchang May 06, 2013, 12:47 PM

  • Member
  • *
  • Posts: 18
I'd like to attach a heatsink/fan unit to the FMC125 for cooling per the documentation.  However, the clearance around the chip is too small for the heatsink/fan unit I was looking at.  Does 4DSP have a recommended heatsink/fan unit for use with the FMC125?  Thanks.

arnaudNL May 07, 2013, 04:48 AM (#1)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Sir,
Some customers been used http://search.digikey.com/us/en/products/ATS-52300P-C2-R0/ATS1138-ND/1284852
This was possible because not too much heights constraints.
Best Regards,
Arnaud