» VID375 Datasheet
» Block Diagram
» Board Image
» Ordering Information
» BSP Datasheet
» Getting Started Guide
» Analog Design White Paper
» Block Diagram
» Board Image
» Ordering Information
» BSP Datasheet
» Getting Started Guide
» Analog Design White Paper
VID375 JPEG 2000 Compression
Description
The VID375 features a JPEG2000 hardware compression solution. It is based on the ADV212 codec devices suitable for on-the-fly compression prior or after the imaging processing implemented on the Cyclone III FPGA device. The VID375 has two low-cost Altera Cyclone III FPGA devices and some fast on-board DRAM memory resources. It is the most efficient hardware compression solution available with embedded processing power. The flexibility of the architecture and the use of the Camera-Link standard makes this solution universal for digital imaging systems.
Enlarge diagram | Enlarge photo
- Digital film compression and storage
- Satellite video frame recording instruments
- High-definition X-ray frame recording
- Medical line scan cameras
- Microscopy, radiology and biopsy analysis
- Mobile imagery instruments
- Low-weight digital video broadcasting
- Real-time loss-less imaging compression
- Two JPEG2000 (ADV212) CODECs
- Two BASE Camera-Link interfaces
- Altera Cyclone III FPGA devices
- Up to 2GBytes of DDR2 SDRAM
- External FPGA clock inputs and triggers
- Embedded NIOS II processor core
- Optimized IP Cores
- PCI-X bus interface
- See available daughter card options
- 4FM GUI offers multiple functions including the ability to monitor voltage and temperature; perform memory tests; measure the PCIe bandwidth; update FPGA firmware; and access StellarIP
- StellarIP available for this product. A simple way to design FPGA firmware with automated code and bitstream generation
- Board control and monitoring tools
- Flash programming utility
- Confidence tests
- Host side API
- Software program example
- Quartus II projects for both FPGAs
- Test firmware and VHDL source code
- Drivers for Windows, Linux or VxWorks