» VID372 Datasheet
» Block Diagram
» Board Image
» Ordering Information
» BSP Datasheet
» Getting Started Guide
» Analog Design White Paper
» Block Diagram
» Board Image
» Ordering Information
» BSP Datasheet
» Getting Started Guide
» Analog Design White Paper
VID372 Dual Base Camera Link Frame Grabber With Video Processing Resources
Description
The VID372 is a high performance PMC full camera link frame grabber. with two mini CL connectors. It offers fast on-board memory resources and two Cyclone III FPGA devices for real time video processing.
Enlarge diagram | Enlarge photo
Features
Camera link frame grabber- Two base configuration via two mini CL connectors
- See available daughter card options
- High speed DSP processing in two Xilinx Virtex-4 ® FPGA
- FPGA A: EP3C40 or EP3C120
- FPGA B: EP3C120 with to 288 embedded multipliers
- FPGA configuration on-board storage
- Off-the-shelf IP cores for real time compression (JPEG2000, edge detection)
- FPGA firmware design services available upon request
- 4 banks of DDR2 SDRAM (512MB, up to 2GB)
- 128Mbit flash device
- PCI 64/32-bit 66MHz, 3.3V
- PCI 64/32-bit 33MHz, 3.3V
64-bit 66MHz : 350MB/s
32-bit 33MHz : 80MB/s
FPGA
- 4FM GUI offers multiple functions including the ability to monitor voltage and temperature; perform memory tests; measure the PCIe bandwidth; update FPGA firmware; and access StellarIP
- StellarIP available for this product. A simple way to design FPGA firmware with automated code and bitstream generation
- FPGA reference design
- Software GUI for card control
- Software utility to program on-board Flash with FPGA configuration data
- Device driver for Windows 2000/XP, Linux and VxWorks
- Test /demonstration application
- Custom FPGA firmware /application /driver development available upon request