Documentation
Software Defined Radio stand alone platform
High-bandwidth high-processing power recording system
4DSP offers a flexible, modular and scalable approach to stand alone systems. Our 4DSP systems can be used in a stand alone mode, or in combination of a motherboard that can host up to two PMC/XMC cards implementing various functionalities such as data acquisition, signal processing and interfaces. The stand alone system is powered by its stand alone power connector (+3.3V, +5V, +12V, -12V or single 18-24V DC). Common data and control links such as USB, Firewire and RS232 make it easy to program and interface to.
Any module can be easily interfaced to any other with normalized firmware and fully compatible hardware. Create the design that matches your requirements with the daughter cards available on the right!
Cards and systems made from off-the-shelf modules offer the following advantages:
| Performance | Scalable and flexible |
| Development cost | Short cycle => reduced risk |
| Obsolescence | Multiple users => reduced risk |
| Production cost | Higher volumes => lower cost |
Daughter cards
A/D | |||
|---|---|---|---|
Sampling rate in MSPS |
Resolution in bits |
Channels |
|
2000 |
8 |
2 |
|
210 |
12 |
2 |
|
125 |
14 |
2 |
|
125 |
14 |
4 |
|
D/A | |||
|---|---|---|---|
Sampling rate in MSPS |
Resolution in bits |
Channels |
|
1000 |
14 |
2 |
|
500 |
16 |
2 |
|
Video | |||
|---|---|---|---|
Standard |
Type |
||
Camera Link |
Base Medium Full |
||
JPEG2000 CameraLink |
Base Medium Full |
||
Feel free to ask us some advice or send your requirements to info@4dsp.com.