4DSP Support Forum

Products => FMC Products => FMC150 => Topic started by: mCezar on November 17, 2014, 09:25 AM

Title: default register values for FMC150 init
Post by: mCezar on November 17, 2014, 09:25 AM
Hello, all,

FMC150's configuration is done by means of registers. The register map is provided in the SD038 document (FMC150 Star). It would be of great help if you gave me the default init values of these registers. Because this way I will be able to write a simple interface code in Verilog or VHDL and avoid using the 4DSP SDK.

Best,
mCezar
Title: Re: default register values for FMC150 init
Post by: arnaudNL on November 18, 2014, 10:52 AM
Dear Sir,


We don't have default init value tables. One thing you can do is to modify sipif.cpp in a way it log all the write and read registers in a file. This would provide you with this table relatively easily. That way you could obtain table for both internal and external clock for example.


The "default" settings are the settings we write from the software application.


I hope that helps,
Arnaud
Title: Re: default register values for FMC150 init
Post by: arnaudNL on November 19, 2014, 06:04 PM
Dear Sir,


Could you please let me know if the information was useful and helps you to move forward?


Best Regards,
Arnaud
Title: Re: default register values for FMC150 init
Post by: arnaudNL on November 27, 2014, 07:04 AM
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.
Title: Re: default register values for FMC150 init
Post by: arnaudNL on December 01, 2014, 06:52 AM
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.