4DSP Support Forum

Products => FMC Products => FMC176 => Topic started by: Clive.Boyd on June 17, 2014, 11:14 PM

Title: Clock of AD9259 on FMC176
Post by: Clive.Boyd on June 17, 2014, 11:14 PM
Dear Sir/Madam,
I am wondering about the clock inputs of ADC9250 on FMC176. According to the specs of AD9250, it has two clocks: CLK+/- and RFCLK. I am wondering which one is used in FMC176. My guess is CLK+/- because the clock output of the PLL on the board is differential (OUT0+/-).  Could you please confirm?

Also, it is possible if you send me the schematics of the FMC176 board?
Thank you so much.

Title: Re: Clock of AD9259 on FMC176
Post by: arnaudNL on June 18, 2014, 10:24 AM
Dear Clive,


We do not provide customers with the schematics; they are not evaluation boards but proprietary products!. I do believe your question is covered by FMC176 user manual, figure 6, please check and report back to me.


Best Regards,
Arnaud



Title: Re: Clock of AD9259 on FMC176
Post by: arnaudNL on June 20, 2014, 04:36 AM
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.
Title: Re: Clock of AD9259 on FMC176
Post by: arnaudNL on June 23, 2014, 05:11 AM
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.