4DSP Support Forum
Products => FMC Products => FMC122, FMC125, FMC126 => Topic started by: jchang on May 06, 2013, 12:47 PM
-
I'd like to attach a heatsink/fan unit to the FMC125 for cooling per the documentation. However, the clearance around the chip is too small for the heatsink/fan unit I was looking at. Does 4DSP have a recommended heatsink/fan unit for use with the FMC125? Thanks.
-
Dear Sir,
Some customers been used http://search.digikey.com/us/en/products/ATS-52300P-C2-R0/ATS1138-ND/1284852 (http://search.digikey.com/us/en/products/ATS-52300P-C2-R0/ATS1138-ND/1284852)
This was possible because not too much heights constraints.
Best Regards,
Arnaud