4DSP Support Forum

Products => FMC Products => Topic started by: dmoto20 on October 22, 2014, 04:23 PM

Title: FMC160 Front I/O Bezel Drawing and Part Numbers
Post by: dmoto20 on October 22, 2014, 04:23 PM
Hi 4DSP,

This is a follow on to a previous topic in which I requested and was provided a *.STP model of the FMC160 such that a company can design a custom heatframe for the FMC160 to attach to our FMC carrier board's heatframe.

The company is requesting the drawing for the FMC160's Front I/O Bezel and the part numbers of the SSMC and HDMI connectors, as it appears our FMC160 heatframe will need to incorporate its own Front I/O Bezel to be more compatible with our custom FMC carrier board's heatframe.

Can you please provide the FMC160's Front I/O bezel drawing and SSMCHDMI part numbers?

Thanks,
Dave
Title: Re: FMC160 Front I/O Bezel Drawing and Part Numbers
Post by: daniel.sill on October 23, 2014, 09:12 AM
HDMI: Samtec   HDMR-19-02-F-SM
SSMC: Applied Engineering Products   7110-1511-000

Bezel drawing attached.
Title: Re: FMC160 Front I/O Bezel Drawing and Part Numbers
Post by: dmoto20 on October 23, 2014, 10:28 AM
As always, thank you very much for your prompt reply!

-Dave
Title: Re: FMC160 Front I/O Bezel Drawing and Part Numbers
Post by: arnaudNL on October 23, 2014, 10:46 AM
Dear Dave,


We try our best! Thanks for the feedback.


I am closing this topic, feel free to open any new topic if you need that.


Best Regards,
Arnaud
Title: Re: FMC160 Front I/O Bezel Drawing and Part Numbers
Post by: arnaudNL on October 23, 2014, 10:47 AM
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.