4DSP Support Forum
Public Access => General Discussion => Topic started by: pnumer on July 03, 2014, 05:51 PM
-
I was told that the ADC chips on these boards could be configured such that they capture data out of phase with respect to each other - is that true and if so how to you configure them?
-
Dear,
This is not the case, the ADCs are all sampling on the same clock. The ADC chips don't have a feature to delay/phase shift the clock internally.
The ADC chips have settings for delaying the QDR/DDR output clocks but this is the digital domain and not the sampling clock.
Best regards,
Ingmar van Klink
-
Dear Sir,
With you permission I will lock this topic, the issue being asserted I believe.
Best Regards,
Arnaud
-
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.