4DSP Support Forum
Products => FMC Products => FMC122, FMC125, FMC126 => Topic started by: miroandi on December 09, 2014, 04:37 AM
-
Hello,
I am using 244_vc707_fmc126.bit file to connect FMC126 to VC707.
I have read CD244.pdf ( FMC126 Reference firmnware for VC707), but I could find only
address map for each block from "sid_package.vhd".
Because I should change the mode of the E2V chip in FMC126,
I want to know the register map related to I2C.
Thanks in advance.
Best regards,
Olive
-
Dear Olive,
The SD (Star documentation) has the offset where all the chips are located.
Look "INTERNAL EV10AQ160 REGISTER MAP" The first register of the A/D chip is located on FMC126 star's base address (from cid_package.vhd) + 0x0001400
I hope that helps!
Best Regards,
Arnaud
-
Dear Olive,
I see you haven't downloaded the file or updated me back. As a follow-up, is there anything I can do around this issue before I actually close the topic?
Best Regards,
Arnaud
-
I downloaded the pdf file.
Thank you very much.
[/size]
[/size]Best regards,
[/size]Olive
-
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.