4DSP Support Forum
Products => Virtex-6 and Kintex-7 DSP Kits => Topic started by: vamshikrish91 on July 03, 2014, 08:18 AM
-
Hello,
I want to configure flash programming file for KC705 to change the default 2.5v. Flash program file is given in the following location:
C:\Program Files\4dsp\4FM Core Development Kit\Plug-Ins\FMC667\Ready Files\KC705_1V8_VADJ
I am following the steps given in 4FM getting started guide, but not able to program(at 8% of completion it is waiting infinitely).
please help me in solving this problem.
Regards
Vamshi
-
Dear Vamshi,
I am not quite sure. 4DSP and many customers can you this file just fine. I assume the problem is not about the VADJ design but you are having a problem with your impact or something like that. Maybe try to use an older impact version.
Maybe your KC705 is not configured properly. I think you should try to follow KC705 documentation and try to get a design in your flash. When you have the right you will be able to use our .mcs file.
Best Regards,
Arnaud
-
Thanks, I will try again and check the configuration settings of KC705
-
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.