4DSP Support Forum
Products => FMC Products => Topic started by: eee558 on March 14, 2014, 05:54 AM
-
Hi,
Does 4DSP provide any reference design for an FMC having a multi-channel ADC, say an FMC 168, where the data from all the ADC channels are brought to a common clk domain from their individual domains. I would be interested to see such a reference code for any carrier board, preferentially ML605, where all the individual channel clock inputs and data are passed through appropriate buffers, IDELAYs, MMCM...etc and the data is available in a single common clock domain.
thanks
erol
-
Dear Erol,
The reference design is only meant to offload snapshots and this is why the firmware is not synchronous.
The answer is no unfortunately. You can still contact saleseurope@4dsp.com to purchase such a design, then 4DSP would be working on these aspects for you.
Best Regards,
Arnaud
-
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.