4DSP Support Forum

Products => FMC Products => FMC204 => Topic started by: aberracasa on August 14, 2014, 02:26 PM

Title: Configure the FMC204 for using the AD9517 VCO
Post by: aberracasa on August 14, 2014, 02:26 PM

I am looking for information on how to configure my FMC204 board to use the VCO inside the AD9517 PLL chip. When I received it, my board was configured to use the on-board 1GHz VCXO which I cannot use in my application. The mod involves the loop filter and probably requires moving a couple of zero ohm resistors.

Thanks
Andre

Title: Re: Configure the FMC204 for using the AD9517 VCO
Post by: arnaudNL on August 15, 2014, 06:48 AM

Dear Andre,


This is an manufacturing option we provide to customers (-C26) indeed. Modifying the PCB on your side will void the warranty so it is strongly advised to get us modify and qualify your board.


Are you interested by this, shall I get you a sales engineer to contact you ?


Best Regards,
Arnaud

Title: Re: Configure the FMC204 for using the AD9517 VCO
Post by: aberracasa on August 15, 2014, 01:56 PM

Hi Arnauld,

Thanks for the reply. I have received the C26 ECO from Dave Thompson.

Best regards,
Andre

Title: Re: Configure the FMC204 for using the AD9517 VCO
Post by: arnaudNL on August 18, 2014, 03:57 AM

This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.