4DSP Support Forum
Products => FMC Products => FMC150 => Topic started by: agoel on September 30, 2014, 06:59 AM
-
Dear Sir,
I have the schematic file for FMC150 r2.1.
Can you provide the following info :
1) Description of U9, U11, U13, U18, U19.
2) Schematic Entry Guidelines that are being followed in making the Schematic.
3) Description of components marked with 'T' & 'X'.
Thank you,
Akanksha
-
Dear,
Please find the answers below:
1. Part numbers of refdesses are:
- U13: 24LC02B-I/ST
- U18 and U19: SN74LVC8T245RHL
2. We follow general schematic entry guidelines extended with guidelines defined within the company.
3. Parts with a 'T' are transformers or baluns, parts with an 'X' are MMCX connectors
Best regards,
Ingmar van Klink
4DSP
-
Sir,
Thanks for replying.
What about U9,U11,U17.
Akanksha
-
Dear,
U9 and U11 are ref desses which are not assigned on the board. U17 is equal to U18.
Best regards,
Ingmar van Klink
-
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.