4DSP Support Forum

Products => Board Support Package (Installation, Licensing, ...) => Topic started by: tomymjacobs on May 30, 2014, 02:23 PM

Title: 64-Bit version of the Board Support Package
Post by: tomymjacobs on May 30, 2014, 02:23 PM

Can you provide the 64-Bit version of the Board Support Package?

Title: Re: 64-Bit version of the Board Support Package
Post by: arnaudNL on June 05, 2014, 08:58 AM

Dear Sir,


Are you targeting PCI or Ethernet, Linux or Windows?


FYI, we are using the BSP on 64 bit Windows "AS-IS" so it works fine including data transfers.


FYI, we are already have native 64 bit code supported on Linux for the last two years.


Best Regards,
Arnaud

Title: Re: 64-Bit version of the Board Support Package
Post by: tomymjacobs on June 06, 2014, 11:00 AM

Hello,
Using FMC-176 with VC707, ethernet and Windows.
Thank You

Title: Re: 64-Bit version of the Board Support Package
Post by: arnaudNL on June 10, 2014, 04:37 AM

Hello Thomas,


I have posted the 64 bit binaries on your private (teradyne) area. Normally you should be able to access it, please report back here if this is not the case!


Best Regards,
Arnaud

Title: Re: 64-Bit version of the Board Support Package
Post by: arnaudNL on June 13, 2014, 08:15 AM

This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.