4DSP Support Forum

Products => Board Support Package (Installation, Licensing, ...) => Topic started by: jlarsson on May 09, 2014, 07:05 AM

Title: VP680 porting from LX240T to SX315T
Post by: jlarsson on May 09, 2014, 07:05 AM

A customer has a design on VP680 with LX240T and consider moving to SX315T.


Q1. Are these fully pin-compatible?


Q2. Would it be sufficient to change the option from LX240T to SX315T to obtain a working bit file?   


Thanks
Jonas

Title: Re: VP680 porting from LX240T to SX315T
Post by: ebarhorst on May 09, 2014, 07:47 AM

Hi Jonas,


they are fully pin compatible


normally changing the target FPGA type is sufficient yes. But as always you never know. On our side we have successfully delivered VP680 with SX315T and did not encounter any issues with our reference designs.


Erik

Title: Re: VP680 porting from LX240T to SX315T
Post by: arnaudNL on June 05, 2014, 09:00 AM

This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.