4DSP Support Forum

Products => FMC Products => FMC122, FMC125, FMC126 => Topic started by: dipencha on April 01, 2014, 08:01 AM

Title: Using HDMI port of FMC126
Post by: dipencha on April 01, 2014, 08:01 AM

Dear Sir
Since we have FMC126 board and another carrier board for which we haven't yet found any reference design file, we are trying to modify the available design files by port changing.
But in our case ,the carrier board doesn't have Ethernet port and we need to capture analog signal to digital  and get those converted signal in some output(PC).
So we are thinking to get those digital data output from HDMI which is on the FMC126.
So we want to know if any reference design is available where the converted data are extracted from HDMI port of FMC126 instead of Ethernet ? so that we can follow that design files and simplify our purpose.

Thank you

Title: Re: Using HDMI port of FMC126
Post by: arnaudNL on June 13, 2014, 07:42 AM

Dear Sir,

Do you still need this information?

Best Regards,
Arnaud

Title: Re: Using HDMI port of FMC126
Post by: arnaudNL on June 16, 2014, 04:42 AM

This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.