4DSP Support Forum

Products => FMC Products => FMC150 => Topic started by: burselam on March 11, 2014, 01:09 PM

Title: FMC150 J17 Switch
Post by: burselam on March 11, 2014, 01:09 PM

Hello;


There is a dip switch on schematic, J17 but my board don't have any dip switch.


So I don't know MODE_SEL and AUX_SEL status. What are they status of MODE_SEL and AUX_SEL ? How can I start my board with default configration (from CD1,CD2,CD3)


Thanks.

Title: Re: FMC150 J17 Switch
Post by: george.bishop on March 11, 2014, 04:41 PM

Without the DIP switch populated, the CDCE72010 defaults MODE_SEL to high.  This selects the SPI bus interface mode and makes AUX_SEL a don't care.


Thanks,
George

Title: Re: FMC150 J17 Switch
Post by: arnaudNL on June 13, 2014, 07:29 AM

This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.