4DSP Support Forum
Products => Board Support Package (Installation, Licensing, ...) => Topic started by: gyellen1120 on January 08, 2014, 09:50 AM
-
I've just newly installed the BSP and my license. I can run StellarIP, load and view a design (and its associated library), and I can generate an HDL skeleton for a cloned star. But when I'm viewing the design and choose StellarIP/generate, nothing appears to happen.
I have set the ISE path to 'C:\Xilinx\14.7\ISE_DS\ISE\bin\nt' (also tried nt64), and also set the verbosity to 'everything', but there is no error message.
Thanks - gary
(also, where can I find the reference software project to accompany the reference firmware (PC720+FMC125+FMC122)?)
(also, I wonder if you could set up a private message area for me, for questions about the specific reference firmware. thanks)
-
Dear Gary,
Did you get a nag box telling that a dll did not load?
Do you see the debug control on the screen, that thing with Error/Warning/Console?
Your private area is located under [size=78%]http://www.4dsp.com/forum/index.php/board,436.0.html [/size][/size][size=78%], can you please post your license file there?[/size]
Any possibilities for us to be granted of a remote desktop to your machine?
We have never heard about such issue so far.
Best Regards,
Arnaud
-
Dear Arnaud - thanks for the quick reply.
No nag box or error messages. Please note that I am trying to 'generate' from the StellarIP application, not from the GUI as described in the documentation. The GUI does not show a StellarIP plugin.
At the moment, I cannot use the private area: [size=78%]The topic or board you are looking for appears to be either missing or off limits to you.[/size][/size][size=78%] [/size][/size]I will try logging out and logging back in. [size=78%]
[/size]I will also set up a guest account for remote access, but only when I'm able to send a private message.[size=78%]
[/size]Also, where can I find the reference software project to accompany my reference firmware (PC720+FMC125+FMC122[sec])? I've looked and can't find any.[size=78%]
[/size]Thanks very much,[size=78%]
[/size]Gary[size=78%]
[/size]
-
I still cannot access the private area link that you sent, even after logging back in (tried Chrome and IE)
thanks - gary
-
Hello Gary,
The access to your private forum should be fixed.
The reference firmware sources are decrypted under : C:\Program Files (x86)\4dsp\Common\Firmware\Extracted, the reference firmware recovery should be installed under : C:\Program Files (x86)\4dsp\Common\Firmware\Recovery.
The software should be either under C:\Program Files (x86)\4dsp\FMC Board Support Package\Refs\Software or C:\Program Files (x86)\4dsp\4FM Core Development Kit\Plug-Ins.
T
-
The issue was resolved on the customer's private area.
-
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.