4DSP Support Forum

Products => FMC Products => FMC103, FMC104, FMC107, FMC108 => Topic started by: robinhood12 on May 17, 2013, 12:20 PM

Title: Use FMC104 and FMC204 on same board
Post by: robinhood12 on May 17, 2013, 12:20 PM

I need to used DAC FMC 204  (HPC) to output waveform and read the same via ADC FMC104 (LPC). The firmware available support both the boards individually. How can i use both the boards simultaneously?

Title: Re: Use FMC104 and FMC204 on same board
Post by: arnaudNL on May 21, 2013, 02:53 AM

Dear Sir,


If everything works with only one FMC card, then you need to merge the two Xilinx ISE firmware projects. We do not have many guidelines as this is far beyond the scope of technical support.


You could also contract 4DSP to design you the firmware you need taking advantages of two FMC products connected on one carrier.


Best Regards,
Arnaud