4DSP Support Forum

Products => Board Support Package (Installation, Licensing, ...) => Topic started by: FPGAengr on May 15, 2013, 01:05 PM

Title: 64 Bit Board Support Package
Post by: FPGAengr on May 15, 2013, 01:05 PM: I am writing a GUI in Matlab to send data to the FPGA using the 4DSP Ethernet module, but the .h, .lib, and .dll files needed on the PC are 32 bits and my 64 bit Matlab won't compile. Is there a 64 bit version of the board support package available?
Title: Re: 64 Bit Board Support Package
Post by: arnaudNL on May 15, 2013, 05:53 PM: Hello,
We have recently ported our driver/api towards native 64 bit but it is very early material, barely beta. Note that we don't expect problem, lack of soak testing.
I assume you might be interested to use the given components, the actual dlls, libs and headers as well as the device driver running natively on 64 bit. The chery on the cake being DMA using the whole computer memor space; implictly no bounce buffering done by the OS.
I can prepare an archive with this components if you wish, just let me know!
Best Regards,
Arnaud
Title: Re: 64 Bit Board Support Package
Post by: FPGAengr on May 16, 2013, 10:46 AM: I would like the 64 bit archive.

Thank you.
Title: Re: 64 Bit Board Support Package
Post by: arnaudNL on May 21, 2013, 03:12 AM: Dear Sir,

I will prepare you an archive somewhere this week.

Best Regards,
Arnaud
Title: Re: 64 Bit Board Support Package
Post by: arnaudNL on May 21, 2013, 06:12 AM: Hello Mark,

I've sent you the zip archive by mail.

Best Regards,
Arnaud
Title: Re: 64 Bit Board Support Package
Post by: FPGAengr on May 21, 2013, 10:55 AM: Did you send it by postal service mail? I have not received an email.

Thank you.
Title: Re: 64 Bit Board Support Package
Post by: arnaudNL on May 22, 2013, 05:03 AM: Dear Mark,

It was sent to your email yesterday 11h12 a.m. Amsterdam time.

The topic is : FW: 64 bit SDK

You are the main recipient

Michael as well as support @ 4dsp are in cc.

I haven't got any email back indicating the email was not delivered.

Best Regards,
Arnaud
Title: Re: 64 Bit Board Support Package
Post by: FPGAengr on May 22, 2013, 10:52 AM: Our email filter may have deleted the message because of the attachment. If you are sending a .zip file please change the extension to .pdf so it will pass the filter. I will change it back once it arrives.

Thank you.
Title: Re: 64 Bit Board Support Package
Post by: arnaudNL on May 22, 2013, 11:05 AM: Hello Mark,

I've sent it again as a pdf attachement.

Let me know when you get it!

Thanks,
Arnaud
Title: Re: 64 Bit Board Support Package
Post by: FPGAengr on May 28, 2013, 11:02 AM: I have not received the email. Please send and email without an attachment to ensure the correct address is being used.

Thank you.
Title: Re: 64 Bit Board Support Package
Post by: arnaudNL on May 30, 2013, 09:43 AM: Dear Mark,

Have you got the archive or not, just for completeness

Thanks,
Arnaud
Title: Re: 64 Bit Board Support Package
Post by: curryj on March 11, 2014, 04:30 PM: Hello,

Has the 64-bit build been incorporated into the main BSP installation? I have 2.221.1 installed right now and I can't seem to find any x64 binaries.

Thank you!
Jim Curry
Title: Re: 64 Bit Board Support Package
Post by: arnaudNL on March 11, 2014, 04:46 PM: Hello Jim,

Not not yet, we lacked of some feedbacks!

Best Regards,
Arnaud
Title: Re: 64 Bit Board Support Package
Post by: curryj on March 11, 2014, 05:37 PM: Arnaud,

Is it possible for you to send me the 64-bit build over email, like you did for FPGAengr back in May?

Thanks!

-Jim
Title: Re: 64 Bit Board Support Package
Post by: curryj on March 13, 2014, 06:05 PM: Arnaud,

Any progress on this? It is a time-sensitive issue for us. We are preparing to launch a new product based on 64-bit software and we can't integrate your board without a 64-bit BSP. Please let me know if you can provide a 64-bit build or not.

Thank you,
Jim
Title: Re: 64 Bit Board Support Package
Post by: curryj on March 24, 2014, 06:40 PM: Arnaud,

Thank you for providing the 64-bit binaries. I've integrated them into my project and they seem to be working well. I will let you know if I encounter any problems.

Thank you for your help!
Jim
Title: Re: 64 Bit Board Support Package
Post by: arnaudNL on April 01, 2014, 08:00 AM: This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.