4DSP Support Forum

Products => Board Support Package (Installation, Licensing, ...) => Topic started by: sanka on October 08, 2014, 07:30 AM

Title: DDR3 FIFO
Post by: sanka on October 08, 2014, 07:30 AM

Hi,

I am wondering if you have a DDR3 FIFO core in your board support package for the boards with DDR3 on them? I am looking at supporting on of the customers design currently and I would really like to employ a DDR3 FIFO between the data from the FPGA and PCIe DMA engine.

Thanks and Regards,

Sanka.

Title: Re: DDR3 FIFO
Post by: arnaudNL on October 08, 2014, 09:22 AM

Dear Sanka,


We provide reference firmware for our boards. They are all having FIFOs. It should be in the firmware source code the customer received. The firmware are decrypted by the installer as per the license file sent to the customer.


Best Regards,
Arnaud

Title: Re: DDR3 FIFO
Post by: arnaudNL on October 09, 2014, 10:27 AM

Dear Sanka,


Anything else I can do for you?


Thanks,
Arnaud

Title: Re: DDR3 FIFO
Post by: arnaudNL on October 13, 2014, 05:38 AM

This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.