4DSP Support Forum

Products => FMC Products => Topic started by: erivard on May 01, 2014, 02:05 PM

Title: FMC164 analog input
Post by: erivard on May 01, 2014, 02:05 PM

I am working on the design of the analog components leading up to the input to FMC164. Two items would be very helpful to me right now: 1. Example data captures, specifically, one with a known input signal level (input into the FMC164 analog port), and one with the input terminated in 50 Ohms. If possible, data at a few different signal levels would be great. 2. A schematic of the front end of FMC164 (the components between the analog inputs and ADS42LB69. 

Title: Re: FMC164 analog input
Post by: iklink on May 02, 2014, 06:10 AM

Dear,


I've send you an email with details about the analogue input line-up. With regards to the example data captures; this is something that I can not provide in the scope of standard support.


Best regards,


Ingmar

Title: Re: FMC164 analog input
Post by: ebarhorst on May 05, 2014, 08:45 AM

Hi,


Did the answer from Ingmar sufficiently answer your question? If so we will proceed and lock the topic


thanks
Erik

Title: Re: FMC164 analog input
Post by: arnaudNL on May 08, 2014, 07:44 AM

This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.