4DSP Support Forum

Public Access => General Discussion => Topic started by: tedjnsn on May 14, 2014, 07:40 PM

Title: syntax error in sip skeleton
Post by: tedjnsn on May 14, 2014, 07:40 PM
Stellar IP "Library -> Star Editor -> Generate HDL Skeleton (No registers)" tool would generate erroneous HDL entity declaration code for some of the sip: when listing worm holes, it would omit ";" sign at the end of next-to-last wormhole, and leave ";" sign at the end of last one. Here's an example:

Code: [Select]
-------------------------------------------------------------------------------------
--Entity Declaration
-------------------------------------------------------------------------------------
entity sip_axis_32b_in2wh_out  is
port (
--Wormhole 'clk' of type 'cmdclk_in':
   clk_cmdclk                              : in    std_logic;


--Wormhole 'rst' of type 'rst_in':
   rst_rstin                               : in    std_logic_vector(31 downto 0);


--Wormhole 'data_in' of type 'axis_32b_in':
   data_in_tdata                           : in    std_logic_vector(31 downto 0);
   data_in_tkeep                           : out   std_logic_vector(3 downto 0);
   data_in_tlast                           : in    std_logic;
   data_in_tready                          : out   std_logic;
   data_in_tstrb                           : out   std_logic;
   data_in_tuser                           : in    std_logic_vector(31 downto 0);
   data_in_tvalid                          : in    std_logic


--Wormhole 'data_out' of type 'wh_out':
   data_out_out_stop                       : in    std_logic;
   data_out_out_dval                       : out   std_logic;
   data_out_out_data                       : out   std_logic_vector(63 downto 0);
   );
end entity sip_axis_32b_in2wh_out;
 
How can fix this tool?


Stellar IP v. 1.1.3.0
Title: Re: syntax error in sip skeleton
Post by: arnaudNL on May 15, 2014, 04:10 AM
Dear Sir,


The HDL skeleton generator is fixed on StellarIP v1.1.6.0 which will be released in tomorrow's installer. Simply redownload your BSP tomorrow to get the update.


The new StellarIP will be able to autoupdate automatically.


Best Regards,
Arnaud
Title: Re: syntax error in sip skeleton
Post by: arnaudNL on June 05, 2014, 09:03 AM
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.