4DSP Support Forum
Products => FMC Products => Topic started by: dipencha on March 31, 2014, 09:31 PM
-
We have purchased FMC126 for some data conversion from Analog to digital.
But out carrier board that we had purchased is Fujitsu, DKXC5VMOD-1 for which we did not get any reference files.
So ,we want to know if we can convert data from analog to digital using just FMC126 ?
Can we avoid carrier board and get our digital data using only FMC126 ? or Carrier Board is a must ?
Thank you
Dipen
-
Dipen,
The FMC126 is not working in standalone. It has to be configured by a firmware (or software through a firmware) so a carrier board is necessary, yes!
Best Regards,
Arnaud
-
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.