Hello Erik,
Thanks for your advice. We realize that the trigger rate of 244 kHz will be the maximum rate. Anyway, we would like to ask for your suggestions on the following scenarios:
1) Can we capture data on ALL 8 channels with 1 trigger pulse with the trigger rate of > 10 MHz ? In this case, we know that the burst size need to be smaller than 1024. So, it can be any small number. Please correct us if we are incorrect.
2) If the question number 1) can be achieved, for capturing data on all 8 channels, what should be an appropriate range for "burst number". In the case that if we would like a burst size < 128 (any number), what should be a busrt number (x), such that x > 1 ?
Thank you very much for your time again. I look forward to your suggestion as always.
Best Regards,
Roengrut