Products > FMC Products
fmc161 vivado project
lmunoz:
I would copy all the source from one project into a folder then the source code of the other project into another folder then use a tool like winmerge to compare the source code of both projects to find what the different is.
arnaudNL:
Dear Sir,
Are you able to move forward? Would you have some feedback for me?
Best Regards,
Arnaud
leongnrl:
The vivado project that you uploaded works and I am happy about it. I have tried to record the command from the ethernet and play them back to initialize the fmc card in order to eliminate the use 4dsp ethernet core. I had that working in ISE but I can't get that to work in Vivado using the same method. Anyway It doesn't seem to be a problem from your code, but it is more likely a problem from Vivado though.
arnaudNL:
Sir,
Thank you for the feedback!
I am closing this topic. Please feel free to open any new topic in the future.
Best Regards,
Arnaud
arnaudNL:
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.
Navigation
[0] Message Index
[*] Previous page
Go to full version