Topic: FMC110+KC705 (250_kc705_fmc110)  (Read 8126 times)

burselam February 02, 2015, 05:18 AM

  • Member
  • *
  • Posts: 8
Hello,


I have a FMC110 board and I will use it with KC705. I am studying on 250_kc705_fmc110 stellar ip project. But it is not include .dns file. How can I use this project?

arnaudNL February 03, 2015, 06:44 AM (#1)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Sir/Madame,


This firmware is old and you need to import the legacy components (.lib and .sdf) into StellarIP. This is covered by 4FM_Get_Started_Guide.pdf document, chapter 8, "Importing StellarIP legacy design and libraries".


Also please note that according to the release note in the firmware, the ISE version you need installed is 14.1. It might work with newer ISE but there are no guarantees. The safest path to results is to use the same ISE version.


Best Regards,
Arnaud







arnaudNL February 06, 2015, 07:10 AM (#2)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Sir/Madame,


Are you able to move forward, is there anything I can do about this issue before to close this topic?


Best Regards,
Arnaud

arnaudNL February 09, 2015, 06:20 AM (#3)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Sir/Madame,


I will proceed with closing this topic in 24 hours without news from your side.


Best Regards,
Arnaud

burselam February 09, 2015, 08:31 AM (#4)

  • Member
  • *
  • Posts: 8
Thanks. It is working now.

arnaudNL February 09, 2015, 08:41 AM (#5)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.