Topic: Register map for 244_vc707_fmc126  (Read 7988 times)

miroandi December 09, 2014, 04:37 AM

  • Member
  • *
  • Posts: 12
Hello,

I am using 244_vc707_fmc126.bit file to connect FMC126 to VC707.

I have read CD244.pdf ( FMC126 Reference firmnware for VC707), but I could find only
address map for each block from "sid_package.vhd".

Because I should change the mode of the E2V chip in FMC126,
I want to know the register map related to I2C.

Thanks in advance.

Best regards,
Olive



  • « Last Edit: December 09, 2014, 05:07 AM by miroandi »

arnaudNL December 09, 2014, 11:32 AM (#1)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Olive,


The SD (Star documentation) has the offset where all the chips are located.


Look "INTERNAL EV10AQ160 REGISTER MAP" The first register of the A/D chip is located on FMC126 star's base address (from cid_package.vhd) + 0x0001400


I hope that helps!


Best Regards,
Arnaud



arnaudNL December 11, 2014, 08:18 AM (#2)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Olive,


I see you haven't downloaded the file or updated me back. As a follow-up, is there anything I can do around this issue before I actually close the topic?


Best Regards,
Arnaud

miroandi December 12, 2014, 09:20 AM (#3)

  • Member
  • *
  • Posts: 12



I downloaded the pdf file.


Thank you very much.
[/size]
[/size]Best regards,
[/size]Olive

arnaudNL December 12, 2014, 11:05 AM (#4)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.