Products > FMC Products
FMC160 Front I/O Bezel Drawing and Part Numbers
(1/1)
dmoto20:
Hi 4DSP,
This is a follow on to a previous topic in which I requested and was provided a *.STP model of the FMC160 such that a company can design a custom heatframe for the FMC160 to attach to our FMC carrier board's heatframe.
The company is requesting the drawing for the FMC160's Front I/O Bezel and the part numbers of the SSMC and HDMI connectors, as it appears our FMC160 heatframe will need to incorporate its own Front I/O Bezel to be more compatible with our custom FMC carrier board's heatframe.
Can you please provide the FMC160's Front I/O bezel drawing and SSMCHDMI part numbers?
Thanks,
Dave
daniel.sill:
HDMI: Samtec HDMR-19-02-F-SM
SSMC: Applied Engineering Products 7110-1511-000
Bezel drawing attached.
dmoto20:
As always, thank you very much for your prompt reply!
-Dave
arnaudNL:
Dear Dave,
We try our best! Thanks for the feedback.
I am closing this topic, feel free to open any new topic if you need that.
Best Regards,
Arnaud
arnaudNL:
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.
Navigation
[0] Message Index
Go to full version