Topic: Require FMC112 Star Document  (Read 7860 times)

chetan.patil November 06, 2014, 04:21 AM

  • Member
  • *
  • Posts: 12
Dear Sir,

We are designing with FMC112 and ML605 board and we want FMC112 Star document to understand FMC112 ADC interfacing with FPGA.
According to "CD223 ML605+FMC112" document, detailed information can be found in the  star  description  documents available per star and this documentation can be found in the the “doc” folder of each star.

So we looked in to FMC112 star library doc folder, but we did not found any document. So please provide us the same.

Regards,
Chetan Patil.

arnaudNL November 06, 2014, 05:50 AM (#1)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Sir,


That's correct, the star documentation was not ready at the time the firmware was released. Please find the document attached to this post.


Best Regards,
Arnaud


arnaudNL November 11, 2014, 07:53 AM (#2)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Sir,


Was the information sufficient? Can I close this topic?


Best Regards,
Arnaud

chetan.patil November 11, 2014, 09:16 AM (#3)

  • Member
  • *
  • Posts: 12
Dear Sir,

Yes information is sufficient and you can close this topic.

Thanks & Regards,
Chetan Patil.

arnaudNL November 12, 2014, 07:07 AM (#4)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.