Topic: FMC150 r 2.1 Schematics  (Read 4588 times)

agoel September 30, 2014, 06:59 AM

  • Member
  • *
  • Posts: 13
Dear Sir,


I have the schematic file for FMC150 r2.1.


Can you provide the following info :

1) Description of U9, U11, U13, U18, U19.

2) Schematic Entry Guidelines that are being followed in making the Schematic.


3) Description of components marked with 'T' & 'X'.



Thank you,



Akanksha
  • « Last Edit: September 30, 2014, 08:11 AM by agoel »

iklink October 01, 2014, 04:32 AM (#1)

  • 4DSP Staff (EU)
  • Member
  • *
  • Posts: 153
Dear,


Please find the answers below:
1. Part numbers of refdesses are:
- U13: 24LC02B-I/ST
- U18 and U19: SN74LVC8T245RHL


2. We follow general schematic entry guidelines extended with guidelines defined within the company.


3. Parts with a 'T' are transformers or baluns, parts with an 'X' are MMCX connectors


Best regards,
Ingmar van Klink
4DSP

agoel October 06, 2014, 02:41 AM (#2)

  • Member
  • *
  • Posts: 13
Sir,


Thanks for replying.


What about U9,U11,U17.


Akanksha

iklink October 06, 2014, 05:27 AM (#3)

  • 4DSP Staff (EU)
  • Member
  • *
  • Posts: 153
Dear,


U9 and U11 are ref desses which are not assigned on the board. U17 is equal to U18.


Best regards,
Ingmar van Klink

arnaudNL October 08, 2014, 03:57 AM (#4)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.