Products > FMC30RF

fmc30rf schematic

(1/2) > >>

stuartwesterman:
Is there any chance that I could get a look at the fmc30rf schematic?

arnaudNL:
Dear Stuart,


No the schematics are not provided to public. The FMC30RF is not an evaluation board, it is a product. The product is shipped along with a complete firmware, software and documentation for it as well as a hardware user manual.


If you feel like some information is missing and prevent you to understand in which mode the chips are operating, please let us know and I will make sure this information makes it through in a new version of the user manual.


Best Regards,
Arnaud

stuartwesterman:
I'd like to see a block diagram of the fmc connector to the afe7225 to the trf3720, that is more detailed than what's in the user manual.

I'd like to see theory on how the afe7225 is configured in concert with the trf3720, in the reference design. How does BurstSize (16*1024) and DacNbPeriod relate to the configuration of of the afe7225 and the trf3720.

arnaudNL:
Dear Stuart,


You have a working reference design, with sources, comments, and documentation. There is a sticky topic about the reference design.


You need to gather this information from the source code and/or the software/firmware documentation such as CDs and SDs part of the firmware source code.


The FMC30RF was integrated successfully by many customers with the same information; One thing we can arrange is to answer all your detailed question through a engineering support contract. Shall I get a sales person to get in touch with you?


Best Regards,
Arnaud

arnaudNL:

Dear Stuart,


I am following up with you, you haven't reported back to me, do you want me to get a sales engineer to contact you to discuss that further?


Best Regards,
Arnaud

Navigation

[0] Message Index

[#] Next page