Topic: Configure the FMC204 for using the AD9517 VCO  (Read 7663 times)

aberracasa August 14, 2014, 02:26 PM

  • Member
  • *
  • Posts: 2
I am looking for information on how to configure my FMC204 board to use the VCO inside the AD9517 PLL chip. When I received it, my board was configured to use the on-board 1GHz VCXO which I cannot use in my application. The mod involves the loop filter and probably requires moving a couple of zero ohm resistors.

Thanks
Andre

arnaudNL August 15, 2014, 06:48 AM (#1)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Andre,


This is an manufacturing option we provide to customers (-C26) indeed. Modifying the PCB on your side will void the warranty so it is strongly advised to get us modify and qualify your board.


Are you interested by this, shall I get you a sales engineer to contact you ?


Best Regards,
Arnaud

aberracasa August 15, 2014, 01:56 PM (#2)

  • Member
  • *
  • Posts: 2
Hi Arnauld,

Thanks for the reply. I have received the C26 ECO from Dave Thompson.

Best regards,
Andre

arnaudNL August 18, 2014, 03:57 AM (#3)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.