Topic: Missing .DSN and .TClib files to generate .xise project (104_ml605_fmc125)  (Read 4337 times)

KevinNIST June 23, 2014, 03:02 PM

  • Member
  • *
  • Posts: 19
Hi,
I'm missing a crucial first step for starting my development project. I'd like to develop my firmware using Xilinx Project Navigator. 4DSP has a process for generating .xise project files from .dsn files using StellarIP. Unfortunately, I do not see a .dsn file to go woth my hardware (ML605 w/ FMC125 daghter card). How can I get a Xilinx Project started in lieu of the missing files?
 
Thanks,
-Kevin
 
 

KevinNIST June 23, 2014, 03:24 PM (#1)

  • Member
  • *
  • Posts: 19
I just saw Chapter 8 of the Getting Started Guide... I will try these instructions and get back...

KevinNIST June 23, 2014, 04:53 PM (#2)

  • Member
  • *
  • Posts: 19
I was able to generate a .xise project from the legacy .sdf and .xml files.

arnaudNL June 24, 2014, 04:11 AM (#3)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Kevin,


Thank you for the feedback. Yes indeed, we are slowly upgrading all the firmwares to the new StellarIP but that takes a long time.


I am happy you could find the information you were looking for.


Best Regards,
Arnaud

arnaudNL June 24, 2014, 04:11 AM (#4)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.