Hi Arnaud,
Sorry to hijack the thread, but I had the same problem described above, the uart os hangs after displaying "Initializing System". I am currently using the FMC667 card attached to the VC707 eval board. The FMC667 card is cooled by a large blower fan, so heat issue is not a problem. The ISE I am using is 14.7.
My eval board(VC707) is able to initalize correctly with the supplied .bit file, so the hardware must be working correctly. Which is the correct firmware to use when configuring vc707 using Stellar IP for my FMC667 card, is it 355_vc707_fmc667_lpc or 402_vc707_fmc667_hpc? I had tried both, but it still doesn't work and 355_vc707_fmc667_lpc is not able to generate due to library problem(unable to locate some items).
I think my problem is similiar to the one in the forum
"4DSP Support Forum » Products » Board Support Package (Installation, Licensing, ...) » FMC667 Board support package test example uart_os init problem". For that problem, the user bypassed the problem by using the .bit file, but this is not an option to me as I need to modify the software in the uart os. I had also tried the advice "I know that there are bugs in ISE where the export to SDK does not really works You should replace the .bit file exported by ISE to EDK with the one created by ISE and that might work.", but it still does not works. Please help.
Thanks!