Products > FMC103, FMC104, FMC107, FMC108
triggering a data capture on FMC104
arnaudNL:
Dear Kevin,
Not sure if such a cable will work, we are not using those. A solution would be a PC720 from us, it is quite cheap!
Then you would get FMC104 on PCIe and a 7 serie device instead your Virtex 6!
Thanks,
Arnaud
arnaudNL:
Dear Kevin,
Is there anything else I can do before to close this topic?
Best Regards,
Arnaud
KevinNIST:
One more thing... We did go ahead and order the FMC125. You mentioned that the ML605 did not have PCIe as part of the Standard BSP. Do you have a PCIe BSP that I can try out with the ML605 and FMC125?
-Kevin
arnaudNL:
Dear Kevin,
The PCIe firmware has a cost because it comes with some support. Typically there are many issues on ML605 and it will be tough to get it up and running.
You should surely consider a card as the PC720, it is so less bulky!
Thanks,
Arnaud
arnaudNL:
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.
Navigation
[0] Message Index
[*] Previous page
Go to full version