Topic: 64-Bit version of the Board Support Package  (Read 3537 times)

tomymjacobs May 30, 2014, 02:23 PM

  • Member
  • *
  • Posts: 2
Can you provide the 64-Bit version of the Board Support Package?

arnaudNL June 05, 2014, 08:58 AM (#1)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Sir,


Are you targeting PCI or Ethernet, Linux or Windows?


FYI, we are using the BSP on 64 bit Windows "AS-IS" so it works fine including data transfers.


FYI, we are already have native 64 bit code supported on Linux for the last two years.


Best Regards,
Arnaud

tomymjacobs June 06, 2014, 11:00 AM (#2)

  • Member
  • *
  • Posts: 2
Hello,
Using FMC-176 with VC707, ethernet and Windows.
Thank You

arnaudNL June 10, 2014, 04:37 AM (#3)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Hello Thomas,


I have posted the 64 bit binaries on your private (teradyne) area. Normally you should be able to access it, please report back here if this is not the case!


Best Regards,
Arnaud

arnaudNL June 13, 2014, 08:15 AM (#4)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.