Hi Tony,
Thanks very much. Today I downloaded the latest version of BSP (I believe it is version 2014.5 as I opened the license file that I obtained). The communication between my ML605 and FMC168 is fine as you can see from the 1st picture. The 2nd picture shows the valid Ethernet connection. But I have another problem to ask for your advice.
I purchased 2 FMC boards from 4DSP, the other one is FMC204. It wasn't really working previously and the error is quite different. Since I downloaded the new BSP this morning, I expected it would also work for my FMC204. I added both of my FMC cards when I downloaded the new BSP and the new license file (which I got one file) lists both serial numbers of my boards; i.e., "PRODUCT=095_ml605_fmc204 VERSION=2014.5 SN=serial1;serial2 ...." where serial1 = FMC168 S/N, and serial2 = FMC204 S/N. After I finished testing my FMC168, I began testing FMC204. Although I downloaded the bit-file from "Recovery" folder or from the one I generated using ISE Project Navigator, the communication between host PC and the boards cannot be initialized (from 3rd picture), which confirmed by the 4th picture (no Ethernet communication). It is strange because all the jumpers on ML605 are at the same positions. If you can suggest me what to do again, it will be really really appreciated.
Thank you very much again !!!
Roengrut