Topic: Not able to configure flash programming file to KC705  (Read 8573 times)

vamshikrish91 July 03, 2014, 08:18 AM

  • Member
  • *
  • Posts: 5
Hello,
I want to configure flash programming file for KC705 to change the default 2.5v. Flash program file is given in the following location:
C:\Program Files\4dsp\4FM Core Development Kit\Plug-Ins\FMC667\Ready Files\KC705_1V8_VADJ


I am following the steps given in 4FM getting started guide, but not able to program(at 8% of completion it is waiting infinitely).


please help me in solving this problem.


Regards
Vamshi

arnaudNL July 03, 2014, 08:42 AM (#1)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Vamshi,


I am not quite sure. 4DSP and many customers can you this file just fine. I assume the problem is not about the VADJ design but you are having a problem with your impact or something like that. Maybe try to use an older impact version.


Maybe your KC705 is not configured properly. I think you should try to follow KC705 documentation and try to get a design in your flash. When you have the right you will be able to use our .mcs file.


Best Regards,
Arnaud

vamshikrish91 July 05, 2014, 04:08 AM (#2)

  • Member
  • *
  • Posts: 5
Thanks, I will try again and check the configuration settings of KC705

arnaudNL July 07, 2014, 03:58 AM (#3)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.