Products > FPGA Products
problems on getting started with FM780+FM110
(1/1)
filippo speziali:
Dear Sir/Madam
Today we received at Aresys our FMC780+FMC110 card mounted on a technobox 5933 PCIe adapted.
We inserted the module on a PCIe slot of an HP workstation.
The problem we see by inspection is that LEDs are signallings some failures.
CPLD LED 1 and CPLD LED2 are flushing fast, while all the other LEDS are OFF.
Of course Windows do not detect anything on the PCI bus
Do you have any suggestions on how to proceed?
Regards
Filippo Speziali
ebarhorst:
Hi Fillipo
can you try to restart your computer and see if the FM780 gets detected? Sometimes the BIOS is too fast in enumerating the PCIe bus and the board will not show until you restart
thanks,
Erik
filippo speziali:
Dear Erik,
I tried to restart the PC as you suggested but the same behaviour occurs.
Led are still blinking
thanks
Filippo
arnaudNL:
Dear Sir,
Just wanted to close this topic as the issue was asserted on your private forum area.
Best Regards,
Arnaud
arnaudNL:
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.
Navigation
[0] Message Index
Go to full version