Topic: Clock of AD9259 on FMC176  (Read 7996 times)

Clive.Boyd June 17, 2014, 11:14 PM

  • Member
  • *
  • Posts: 7
Dear Sir/Madam,
I am wondering about the clock inputs of ADC9250 on FMC176. According to the specs of AD9250, it has two clocks: CLK+/- and RFCLK. I am wondering which one is used in FMC176. My guess is CLK+/- because the clock output of the PLL on the board is differential (OUT0+/-).  Could you please confirm?

Also, it is possible if you send me the schematics of the FMC176 board?
Thank you so much.

arnaudNL June 18, 2014, 10:24 AM (#1)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Clive,


We do not provide customers with the schematics; they are not evaluation boards but proprietary products!. I do believe your question is covered by FMC176 user manual, figure 6, please check and report back to me.


Best Regards,
Arnaud



arnaudNL June 20, 2014, 04:36 AM (#2)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.

arnaudNL June 23, 2014, 05:11 AM (#3)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.