Hi,
We are trying to use FMC Analyzer on FMC110 and ML605 platform via Ethernet, the firmware we use is the bit-stream in "4dsp\Common\Firmware\Recovery078_ml605_fmc110" folder.
"Open Device" is success and the spectrum chart works, but nothing is shown in the chart when switches to oscilloscope type (the screen capture is uploaded for a attachment).
ADC inputs are floating and internal clock is used, and raw ADC data can be save to a file, it seems that it is a software bug.
We install/re-install the 4FM SDK for 2 versions (Installer Version 2.225.1 & 2.219.2), but it goes the same.
Would you please give me some advices for the problem?
Thanks,
lufang