Topic: about using FMC126 without using any carrier board  (Read 1853 times)

dipencha March 31, 2014, 09:31 PM

  • Member
  • *
  • Posts: 13
We have purchased FMC126 for some data conversion from Analog to digital.
But out carrier board that we had purchased is Fujitsu, DKXC5VMOD-1 for which we did not get any reference files.
So ,we want to know if we can convert data from analog to digital using just FMC126 ?
Can we avoid carrier board and get our digital data using only FMC126 ? or Carrier Board is a must ?
Thank you
Dipen
 

arnaudNL April 01, 2014, 06:44 AM (#1)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dipen,


The FMC126 is not working in standalone. It has to be configured by a firmware (or software through a firmware) so a carrier board is necessary, yes!


Best Regards,
Arnaud

arnaudNL June 13, 2014, 07:42 AM (#2)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.