Good day to you.
Got an issue when trying to work with FMC110 card on KC705 board.
KC705 tested witj reference designes and worked normally.
Software and drivers installed without errors.
FMC110 card connected to HPC slot and to PC with the ethernet cable.
Loaded design 250_kc705_fmc110.bit to the K7 FPGA on board from the directory C:\Program Files (x86)\4dsp\Common\Firmware\Recovery\250_kc705_fmc110\ with a JTAG.
but 4FM GUI show error "no device found"
Tryed another application - 4FM FMC Analyzer and again got error
Inspection with Oscilloscope shows that not all CLK from AD9517 generated correctly. (For example, no clk to the FPGA on mainboard via FMC connector pins H4, H5, etc).
Looks like an issue with CPLD to me.