Public Access > General Discussion

From StellarIP no ISE files (and other files) are being generated !!

(1/2) > >>

dipencha:
In StellarIP after opening some reference design, pressing CTRL+G(i.e Generate) on StellarIP menu no files are generated.
What is the reason of this ? Please help me with this problem.
I need to get ISE files to compile using ISE suite.
Thank you
Dipen

arnaudNL:
Dear Dipen,


Can you please detail the step you have taken? Can you provide me with the debug output from the software when you press CTRL-G


Thanks,
Arnaud

dipencha:
Thank you for the response.

Well ,I just opened the reference design as its said in getting started manual.
Than I press CTRL+G but nothing happened .
No progress screen or anything.
and yeah no files generated as it has been said in the manual !!!

Thank you
Dipen

arnaudNL:
Dipen,


Can you install teamviewer in your machine and provide me with the details? I would like to check a few things myself.


Thanks,
Arnaud

arnaudNL:
Dear Sir,


After remote controlling your machine I could see that:


1) The debug/console view was hidden in your GUI. I have changed that by pressing the debug/text button in the toolbar.
2) Some firmware were still on a path with space characters in it.




Best Regards,
Arnaud

Navigation

[0] Message Index

[#] Next page