Topic: From StellarIP no ISE files (and other files) are being generated !!  (Read 3222 times)

dipencha February 27, 2014, 08:13 AM

  • Member
  • *
  • Posts: 13
In StellarIP after opening some reference design, pressing CTRL+G(i.e Generate) on StellarIP menu no files are generated.
What is the reason of this ? Please help me with this problem.
I need to get ISE files to compile using ISE suite.
Thank you
Dipen

arnaudNL February 27, 2014, 08:39 AM (#1)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Dipen,


Can you please detail the step you have taken? Can you provide me with the debug output from the software when you press CTRL-G


Thanks,
Arnaud

dipencha February 27, 2014, 08:43 AM (#2)

  • Member
  • *
  • Posts: 13
Thank you for the response.

Well ,I just opened the reference design as its said in getting started manual.
Than I press CTRL+G but nothing happened .
No progress screen or anything.
and yeah no files generated as it has been said in the manual !!!

Thank you
Dipen

arnaudNL February 27, 2014, 09:59 AM (#3)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dipen,


Can you install teamviewer in your machine and provide me with the details? I would like to check a few things myself.


Thanks,
Arnaud

arnaudNL February 27, 2014, 11:12 AM (#4)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
Dear Sir,


After remote controlling your machine I could see that:


1) The debug/console view was hidden in your GUI. I have changed that by pressing the debug/text button in the toolbar.
2) Some firmware were still on a path with space characters in it.




Best Regards,
Arnaud

dipencha February 27, 2014, 12:36 PM (#5)

  • Member
  • *
  • Posts: 13
Dear
I again repeated those all to learn.
I deleted those folders that were copied.After I delete I found out that there were no Library added which you initially added with "Imported Library". I tried to add the same library "Imported Library" but I couldnt't find this named library even in the original firmware folders.
How did you create this "Imported library" ?
I then copied (repeated) same task like copying those firmware folders on another folder and open StellarIP and then opened the design with that console/debug open.
Then I tried to generate ISE file but as earlier case ,it didn't happen/.
Would you mind please repeating those tasks writing here in this discussion if possible ?
Thank you
Dipen

arnaudNL April 01, 2014, 07:57 AM (#6)

  • 4DSP Staff (EU)
  • Administrator
  • Member
  • *****
  • Posts: 7110
This topic is being closed because the issue is considered as resolved by 4DSP. Feel free to create a new topic for any further inquiries.